Caring for The PC

In particular computer hardware maintenance of a computer in order to stay well, here we show you some steps take care of computer hardware.

1. As much as possible the voltage consumed by the computer must be stable. The voltage is too low and too high damage both the computer hardware. Therefore, use the Stabilizer and UPS to maintain it.

2. Living off the computer according to the procedure. Never immediately unplugged the computer when the computer is operating, is also an absolute requirement applies to the computer "hangs" though. This action is very dangerous for the stability of the Power Suply computer.

3. Computer must be protected from the sun directly.

4. Do not place objects filled with water to avoid pouring water on the hardware. 

5. Avoid placing equipment that are / can cause the magnet around the computer, because it would mess up the monitor and can damage the internal hardware units of the CPU.

6. Periodically clean the computer of dust attached by using a paint brush, a soft cloth and air atomizer.

7. Overall clean the surface of the mainboard by using air pumps to remove dust. Especially on the memory socket because if this socket dirty / dusty then the memory will not work optimally.

8. Clean heatsink and fan CPU cooler with soft brush or air pump.

9. Open the RAM memory carefully and wipe with a soft cloth, especially on the legs.

10. Open Power Suply with a screwdriver and clean carefully.

11. Clean all external ports that exist on the mainboard, especially the USB port.

12. If you are using a VGA card ad on clean, especially on the heat sink of dust.

13. Clean using a soft brush the surface of the keyboard.

Note:
We recommend that you carefully open the hardware, especially memory and Precessor. If in doubt, simply open the side cover and then just start clean.

Related posting: